When you experience a problem with your heat pump in Kingsville, TX, it’s important to understand what you can do. Here are some of the common problems you may face with your broken heat pump and how to troubleshoot it:
Incorrect Thermostat Settings
Firstly, one of the most common problems with a heat pump is incorrect settings on your thermostat. If your system isn’t working correctly, ensure you’ve set it correctly to heat or cool.
Also, look at the fan switch and make sure it’s set to Auto. If it’s set to On, the fans will continue to run, even when the unit isn’t engaged.
Refrigerant Leaks
Whether your system is running on heat or cool, it depends on refrigerant to make it work. If your system has a refrigerant leak, it won’t generate the right refrigerant pressure to absorb and transfer heat. The best way to detect a refrigerant leak is through routine maintenance. A service technician will test the pressure and repair it on the spot if necessary.
A Stuck Reversing Valve
The reversing valve is what enables your heat pump to switch between heating and cooling. However, sometimes that valve may get stuck open, preventing the switch from taking place.
There are a host of reasons your reversing valve may be stuck, from electrical to mechanical problems. A service technician will identify the root cause and fix it, sometimes without needing a replacement.
Malfunctioning Starter Capacitor
Finally, if your system fails to initialize, it could be a problem with the starting capacitor at the compressor. This is an easy problem to identify if you hear a faint clicking sound when it should start.
If you suspect your capacitor is bad, call a service technician to troubleshoot and replace it. These carry a large electrical charge that can cause serious injury if attempted without proper training.
Don’t try to repair your heat pump on your own to prevent additional damage. Call to schedule your heat pump repair with the NATE-certified service technicians at Bodine-Scott Air Conditioning Co.
Image provided by iStock
